Biohazard Wipes
 
Biohazard Wipes offer dual-use benefits for modern healthcare facilities by incorporating the chlorine donor Troclosene sodium (NaDCC) and an anionic surfactant.
 
The dry nature of these wipes overcome the instability associated with wet chlorine wipes.
 
When placed directly onto a blood or blood-stained body fluid spillage, each dry wipe will absorb the spillage and disinfect with 10,000 ppm available chlorine strength.
 
When moistened, the wipe can be used for general environmental disinfection in the same manner as if using a Chlor-Clean solution. This is particularly useful for patient associated equipment such as commodes. The Chlor-Clean formulation allows surfaces to be cleaned and disinfected in one simple wipe action.
 
Broad spectrum biocidal activity, proven through independent EN Standard testing*
Effective against
Fungi
Viruses
Mycobacteria
Bacteria
Spores (including C.difficile)
 
*Certified with BS EN 14476, BS EN 13704, BS EN 17126, BS EN 16615. Proven effective against pathogens suhc as MRSA, VRE, Clostridium difficile, including spores and blood borne viruses.
 
Instructions for Use
Always wear protective gloves and apron. Use only in well-ventilated area.
 
General Environmental Disinfection
Remove wipe and re-seal pack
Check the cold tap is running cold, then only wet the centre of the wipe for a second
Squeeze wipe over sink, bowl or bucket to remove excess water
Clean & disinfect area with the wipe. Leave area moist, NOT wet.
Dispose of all wipes as CLINICAL WASTE.
 
For Blood and Blood-Stained Body Fluid Spillages
Remove wipe and re-seal ack. Large spills may need more wipes.
Absorb spill directly with the wipe(s).
Use another wipe, wetted as above, to finally clean and disinfect the area.
Dispose of all wipes as CLINICAL WASTE